Green Clean Electricity, Inc.

The Green Clean Electricity process works on two basic principles:

1. Air injected into a closed container will displace the liquid in the direction of least resistance.
2. When the compressed air generated exceeds the amount of water flowing thru the process the excess air can be used to pump extra liquid.  

Figure 1 shows a closed container filled with a liquid. Note the liquid seeks its own level.

Figure 2 shows that as air is injected into a closed container the air displaces the liquid forcing the liquid up the pipe until the pressure from the column of the liquid equals the pressure of the air.

The above illustration shows how air can be used to move water uphill back to the original starting level of the process.

A key to making a self- sustaining operation is to find a process that generates an amount of air that exceeds the amount of liquid flowing through the process. A system that can be modified to do this is the water hydraulic air compressor built in Cobalt Canada. The process worked for over fifty years to produce compressed air. A mathematical model of the process is shown in the chart below. As the amount of air entrapped in the falling water increases the water flow decreases. The initial decrease in water flow is significant until it reaches a point where the water flowing in the process equals the compressed air generated. After this point the water flow continues to decrease but not as rapidly as more air mixes with the liquid flowing through the system.

 Properly structured this system can produce ~ 3 times the amount air needed to make the system self- sustaining. Excess air is used to pump excess liquid for use as needed.